Originally Campaigned on the venerable Manx Racers built especially for the longer circuit race at The Isle of Man, this was considered the TT (Tourist Trophy Unit). The Alloy Manx TT Tank has been modified in the Tunnel section to be used with the Single Backbone Tube frames used on almost all bikes until the late 70s and early 80’s. The bottoms use special hardened alloy to shrug off vibrations associated with unbalanced motors used during that period. Please let the sales desk know which bike you are using this on to insure a great fit on your ride. No more worries about additives in your fuel which exacerbate associated fiberglass tank failure.
Aprox 4 Gallon with polished vented bayonet cap or authentic 2 1/2″ Monza Alloy vented Cap (optional).
These tanks guaranteed to WOW the most hardened Cafe’ Racer Critics!
THIS TANK IS CONSIDERED UNIVERSAL AS IT WILL FIT MOST SINGLE BACKBONE FRAME BIKES. LET US KNOW WHAT BIKE YOU INTEND ON USING IT ON IN THE NOTE BOX UPON CHECK OUT. THERE MAY NEED TO BE AN UPCHARGE IF THERE ARE EXTENSIVE MODIFICATIONS NEEDED.
25-1/2″ L (plus 1″ tab) x 12″ W x 8-1/2″ W (at rear) x 9″ H (plus cap)
**PLEASE READ THIS IMPORTANT NOTE ABOUT OUR TANKS**
We offer these tanks two ways: Mill finish, smooth planished sanded finish OR Highly show polished, which is a very labor intensive sanding 5 step process before taking it to the buffing department for a two step comprehensive show quality finish.
Neither tank and seat are a direct replacement for your stock units. To achieve this we would have to literally have hundreds of tank bottoms and seat designs to facilitate it.
Instead, we designed a general backbone tunnel “universal design” then make minor modifications to make it fit specific models. I’ve also found over time that the mounting system with the cup and pucks are not strong enough on the aluminum as they are on the stock tanks. In the case of the CB750 SOHC models for example, require cutouts for frame gussets and recessed areas for the carb slide heads to operate.
My mounting system consists of flanges blind nuts welded into the tank bottom whereas you use your own strap iron bracket fastened to the frame then bolted to the tank using the nut locations. INSTRUCTIONS INCLUDED
Also, normally these tanks are what we refer to as “UNIVERSAL FIT” tanks. That is they are made with a bottom that has a tunnel which will fit the standard single backbone tube frames, Normally most pre- Dual Overhead Cam bikes (circa 1950 to the Late 1970s).
We will be glad to quote the custom bottom for your application, however there will be an upcharge for this additional service. Should you want the custom fit bottom tank this is considered a custom fit tank and under no circumstance is the tank returnable as it is a one off build for you…
There may be an additional price adjustment as the checkout does not correctly calculate insurance and international shipping prices or foreign currency exchange fluctuation.
Fabricated from over 1/16″ work hardened aluminum Alloy, These tanks are HANDFORMED in the UNITED STATES by old world craftsmen (David Ashenbrener) with pride which keeps the surface unwavering, thickness uniform and unstressed as possible.
The tooling forms I use assures that they are symmetrical and authentically shaped to their antique counterparts. All seams are beautifully TIG welded by highly trained Aerospace Professionals, right here in AMERICA.
These are superior to anything that’s coming out of the 3rd world countries You will be very impressed with our quality and attention to detail. I hand planish each and every one until perfection is achieved.
Your Bike is your Persona…Why take a chance…? Do you really want to put a wavy, scratched tank with scabby and leaky welds on your show machine just to save a couple bucks…?